Burning Art Guidelines
Thank you so much for your work on behalf of our community. It would not be the same without you. Below is a list of materials that we have to prohibit from all fires at PDF, as well as safety guidelines that we must require of you in order to prevent damage and/or disasters at PDF. Please be aware that if you do not follow these guidelines, you may not be awarded the full amount of your art grant.
Any kind of firework that explodes or involves a rocket is illegal under PA law, and may draw undesired attention to PDF. (Sparklers, fountains, spinners, whistlers are all fine.)
Any solid accelerant (or device containing it) without previous approval of the Burning Arts Team and inclusion in the Burn Plan
No synthetic fabrics (synthetics can throw off flakes of burning, melting ash)
Only a minimal amount of natural fabrics may be used in any piece- consult Burning Arts Coordinator before burning.
No glue-based wood materials such as micro density fiberboard MDF, melamine.
No flame retardants.
No pressure-treated wood. (beware the green tint- it may contain arsenic)
Nothing classified as a hazardous material by the postal service
No oxidizers without previous approval of the Burning Arts Team and inclusion in the Burn Plan
Anything (other than small amounts of magnesium ribbon and/or legal fireworks) that results in a class D (burning metal) fire is prohibited.
No electrical components
No color paper of any kind
No pressure vessels (even empty ones); including spray paint cans, propane canisters, etc.
No white gas
No LNG (liquefied natural gas)
No paint with a heavy metal pigment (red/yellow/black lead, cadmium, chrome etc)
No more than a minimal amount of duct tape. It should only be used as a fastener. Paper based tape would be preferred.
**If you have questions, contact the Burning Arts Coordinator or Fire Safety Lead BEFORE you burn**
SAFETY AND CLEAN UP GUIDELINES
1. Stuff burning on the main pad needs to fit inside 16' equilateral pyramid. (If little bits, like the horn of a unicorn, stick out, that's fine.)
2. If you aren't on the pony pad, it needs to fit inside an 8' x 8' x 8' cube.
3. No piece can be larger than 17 feet tall EVER. We do not have the ability to control a fire piece larger than that.
4. Your piece needs to be in place on its burn pad and complete by on the day of your scheduled burn. Your piece gets fueled 30 minutes prior to your scheduled burn time. After your piece gets fueled, you need to have at least one member of the art team physically present to keep an eye on it (keep an eye out for smokers, folks spinning poi, etc). Presoaking logs with fuel can improve the lighting of your piece; if you're not burning on a stack, consider presoaking a few. This needs to be covered explicitly in the Burn Plan.
5. Please use ferrous hardware (screws, nails, etc) that can be picked up with a magnetic sweeper. If you have an artistic need to use small, sharp, non-ferrous pieces (brass tacks or whatever), please alert the Burnings Arts Coordinator (it affects cleanup ).
6. As the artist, please verify that your piece has been cleaned up prior to . (Historically, the fire team has a pretty good record on handling cleanup, but remember - fire team is not responsible for your piece being cleaned up, you are.)
7. As a general rule of thumb, accelerants that are thicker than water (kero, diesel, lamp oil, tiki fuel, bio-diesel (this probably won't work well, but we won't object to you using it), paraffin, etc) is allowed, and most of the ones thinner than water (gasoline, white gas, coleman fuel, LNG, etc) are not. If you're unsure, ask Burnings Arts Coordinator. Any kind of pressurized canister is not allowed. PDF can provide tiki fuel for you. Remember, the goal is to burn wood, not accelerants, and with proper construction, you don't need much accelerant.
8. Without prior approval, burning art pieces may not be used as elevated observation platforms or climbable art. If an artist is interested in making their burnable art interactive in this manner, please contact the Burning Arts Team (via the email on the PDF page) in advance of applying for an art grant. (They're a safety hazard before they burn, and making them mechanically strong enough means using wood that's thick enough to burn for a long, long time.)
9. Do not transport firewood (including brush and driftwood) across state lines, due to concerns about transporting pests like the emerald ash borer.